Interlocking Walk Path Mold Good Toughness , PP Plastic Garden Path Concrete Forms

Interlocking Walk Path Mold Good Toughness , PP Plastic Garden Path Concrete Forms

This kind of mould can make hexagon blocks with a hole, and it can be used as grass-planting block, slope protection block...

Product specification

Instructions

Step 1: Remove 1 inch of top soil, and level the mold before filling with
concrete. Removed top soil can be used to fill open spaces on sides
after walk has set up.
Step 2: Add sufficient water for the amount of concrete being mixed. Mix
thoroughly until plastic-like consistency is achieved. If additional water is
required, add small amounts until the proper consistency is obtained.
Step 3: Use a shovel or trowel to fill each mould cavity to the surface of the
mold. Pat and smooth the surface with a trowel.
Step 4: Remove the mold promptly, and smooth the concrete edges with a
trowel until the desired appearance is obtained.
Step 5: Place the mold adjacent to the completed section and continue this
process until your project is completed.

Colorful Choices
Coloring gives molded concrete a more natural looking finish and is great for
blending your path or walkway into your landscape design. Adding colorant
to the concrete mix is the easiest method and produces consistent results.

Delivery

It depends on the quantity and kinds of the order, normally we can finish a 20' feet container in 3 days. Shanghai port or Ningbo port is our first choose, they are nearby our factory, around an hour for driving.